Custom Length Metal Mesh Tube Micron Round Diamond Hole Pattern
Forward Wire Cloth can make any metal perforated tube, they can be
polished or not polished, by the way, we supply many top leading
company in metal area. However, If you want the best quotation, you
need offer material, quantity, diameter, hole size and length. If
you believe us, we make the profit for your believe.
fuel oil filter element metal mesh tube wire mesh screen tube
Perforated metal tube can be used for decorating, cage ventilation,
antiskid. At the same time, it can be as the guard of central
heating, air conditioning equipment, different sorts of chassis and
machines. Another important use is filtration. For instance,
filter, filter pipe, water and gas treatment equipment
Materials: stainless steel, aluminum, or other alloy.Hole pattern:
Micron round, diamond and as required.Open area: It will determine
the strength of the support tube and the filter flow.Hole size and
thickness: Various to meet different requirements for tubing
strength and filtration , table as follows is for your reference
but all can be as required.
I. Stainless Steel Sintered Felt Cores:
The most important filtration media comes form stainless steel
fiber sintered felt as the core, while the sintered felt is mainly
from stainless steel fibers in diameter of 1.5 ~ 80 microns. These
metal fibers are evenly laid out in the 3D structure formation of
non woven mesh and after high temperature sintering, fibers are
fixed each other, thus carry out as a filtering medium with
excellent integrality, uniform filtration, low flow resistance,
higher dirty holding capacity and the smallest particle capture.
What is more, the porosity can reach above 85%, which is two times
more of sintered metal powder filters.
Technical Properties of Stainless Steel Sintered Felt Cores:
Sintered (fiber) felt, with a minimum filtration rating, the
highest accuracy, the best permeability, is widely used in chemical
equipment for coal filtration, such as in the production of
methanol, acetic acid, ammonia and other chemicals.
• Competent of high porosity and permeability, resistant to high
temperature (up to 1,000° C), acid and alkali corrosion for
high-precision filtration requirements.
• Excellent mechanical strength to withstand the maximum pressure
up to 6.9 Mpa, especially suitable for melted polymer filtration.
• Accuracy: The filtration rate can reach l ~ 100 micron for
liquid, 0.1 ~ 10 micron for gas.
• Diameter: 35 , 62, 65 , 70, 86 , 100 and 140 mm , as well as
non-standard custom fabrication.
• Length: 100 to 1500 mm , as well as non-standard custom
• Connector: Standard 215, 220, 222, 226, as well as threaded,
flange, flat head, a flat surface, or on the request.
• Available in single, multi-layer sintered felt to match the
requirements of the most suitable process characteristics (such as
pressure deduction, filtration efficiency, particle load capacity,
II. Stainless Steel Sintered Powder Cores:
Stainless Steel Sintered Powder Cores are widely used in filtration
of polyester, oil refinery, pharmaceutical, food and beverage,
chemical products seperation, and water and air filtration.
In order to obtain good performance sintered metal powder filter
media, standard process firstly is pressed the metal powder in a
mold into sheet, tubular or other shape and then sintered/formed at
high temperature. The medium pore, pore size distribution, strength
and permeability of products are depending on the fineness of the
metal powder, pressing and sintering process.
The most common material types are stainless steel and bronze, the
others like nickel, Monel, Hastelloy, Inconel, titanium, aluminum
and tantalum are used as well.
Sintered powders are having a deeper filtration property, when the
filter reaches at the set pressure, water or gas can be used for a
blowback wash in order to achieve the regeneration of the filter
and be used repeatedly.
Stainless steel powder sintered cores, using leading manufacturing
processes, are made from selective spherical metal particle in
diameter of 0.5 to 100 microns. They are sintered at high
temperature after the standard mold pressing through strict control
of each steps, so that filters are with high mechanical strength,
high temperature and corrosion resistance, even pore distribution
and permeability, easy to clean and renewable, weldable and
Following ASTME-128, we test pore size of the filter, the powder
sintered filter has 10 precision levels: 0.1, 0.2, 0.5, 1, 2, 5,
10, 20, 40 and 100 microns, corresponding to the average pore size
for filter elements.
Technical Properties of Stainless Steel Sintered Powder Cores:
• Stable shape, impact resistance and alternating load capacity
better than other metal filter materials.
• Good ventilation, stable separation, especially for high
temperature, corrosive gases filtering.
• Excellent mechanical strength, suitable for high temperature and
pressure and corrosive environments;
• Accuracy: 0.1 to 100 microns (liquid and gas has different
• Diameter: 20, 30, 35, 50, 60, 70, 80, 135 mm, as well as
non-standard custom fabrication.
• Length: 100, 150, 200, 250, 300, 500, 600, 750, 1000, 1500, 2000,
2500, 3000 mm, as well as non-standard custom fabrication.
• Connector: Threaded (4 ', 6', M20, M30, M40, etc.), 215, 220,
222, 226, flat head type, flange type, flat type.
• Depending on the filtration requirements, available in all kinds
of shapes (plates, sheets, discs, rings, cones, etc.), and with a
variety of connector styles.
• Antimicrobial ability, not play the role of microorganism, no
particle shedding, it prevents from secondary pollution of the
• Applicable in the field of medical and biological engineering.